AC Heat Pump Installation in Houston, TX - Reliable Heating and Cooling in One System

A heat pump heats and cools your home with one system, which simplifies maintenance and can lower energy costs year-round. In a city like Houston where winters are mild and summers are long, a heat pump handles both seasons without needing a separate furnace. Our team at 75 Degree AC installs and tests both modes on site so the system is ready for every season from day one.

AC heat pump installation by 75 Degree AC in Houston since 2016

Houston's Trusted Team for AC Heat Pump Installation Since 2016

A heat pump is not just an air conditioner. It heats and cools through one system, and installing it correctly means testing both modes, setting up defrost controls, and programming the thermostat for year-round performance. 75 Degree AC has been handling AC Heat Pump Installation across Houston since 2016 with contractors trained on both sides of the system.

Not every home is the right fit for a heat pump, and that is made clear upfront. Electrical panel limits, existing gas infrastructure, and home insulation all play a direct role in long-term savings and system performance. The goal is to give you an honest answer before any work begins.

The full installation price is quoted before the job starts, covering equipment, labor, refrigerant, wiring, and thermostat setup. Both heating and cooling modes are tested on site, and the system is verified running correctly before we close the job.

AC Heat Pump Systems We Install for Houston Homes

Houston homeowners choose heat pumps for different reasons, and not every home calls for the same setup. Here are the Ac Heat Pump Installation types we handle most often across the Houston metro area.

Standard Air-Source Replacement

The most common Ac Heat Pump Installation Houston TX homeowners request is a straight swap of an aging unit. Our technicians remove the old system, set the new outdoor and indoor components, run the refrigerant lines, and test both heating and cooling before leaving the job site.

Upgrading From AC to Heat Pump

Switching from a traditional AC and furnace setup to a heat pump gives your home year-round climate control from one system. We evaluate the existing ductwork, electrical panel capacity, and thermostat compatibility, then install the heat pump and verify both modes are running correctly.

Dual-Fuel Hybrid System

A dual-fuel system pairs a heat pump with a gas furnace so the home switches to gas heat during the coldest nights. Our contractors install and wire both components, set the switchover point on the thermostat, and confirm the system transitions between fuel sources smoothly.

Variable-Speed Heat Pump

Variable-speed heat pumps adjust output based on demand instead of cycling on and off at full power. We install these systems with matched air handlers and communicating thermostats, then calibrate the staging settings so the unit runs at the right speed for each condition.

Heat Pump Air Handler Swap

When the outdoor heat pump is still in good shape but the indoor air handler has failed, we replace only the air handler. We match the new unit to the existing outdoor equipment, reconnect the refrigerant and electrical lines, and test the full system under both modes.

What Customers Say About Our Service

Signs you need AC heat pump installation or replacement by 75 Degree AC

Signs It Is Time to Install or Replace Your AC Heat Pump

Heat pump systems give off clear signals when they are wearing out or no longer keeping up with the demand. Our licensed contractors see these warning signs regularly, and replacing the system before a full breakdown saves time and prevents emergency calls during peak season.

  • Energy bills rising with no change in usage
  • Heat pump running constantly without reaching temperature
  • Frequent repairs adding up over the past year
  • System older than 12 to 15 years
  • Uneven heating or cooling between rooms
  • Loud or unusual sounds from the outdoor unit

Why 75 Degree AC for Your AC Heat Pump Installation in Houston

75 Degree AC handles AC Heat Pump Installation in Houston with a process built around getting the system right the first time.

Dual-Mode Testing Included

Every heat pump we install goes through a full test in both heating and cooling mode before the job closes. Our technicians verify airflow, refrigerant charge, thermostat response, and temperature output so both modes are confirmed working on the day of install.

Honest Fit Recommendation

Not every home is a good candidate for a heat pump. We review the existing system, electrical panel, and ductwork layout before recommending one. When a different setup makes more financial or practical sense, we tell you directly instead of pushing a sale.

Complete System Pricing

The quote you receive covers the full job: equipment, labor, refrigerant, wiring, thermostat, and permits. Nothing gets added after the price is locked. Our contractors walk through the line items before any work begins so you know exactly what you are paying for.

Fast Installation Scheduling

Same-day and next-day Ac Heat Pump Installation is available for most jobs across Houston. Our team confirms the schedule when you book, and the install crew arrives with all equipment and materials ready to complete the job in one visit.

Get Your AC Heat Pump Installed in Houston Today

Running two separate systems for heating and cooling costs more than it should. Call 75 Degree AC today at (713) 598-2737 and we will evaluate your home, confirm the right heat pump fit, and give you a complete price with no add-ons.

How We Install Your New Heat Pump System

Heat pump system installation process by 75 Degree AC in Houston

Home Evaluation & Load Calculation

We start by measuring your home's square footage, insulation levels, window exposure, and duct layout. A proper load calculation determines the right system size so the heat pump does not short-cycle in cooling or struggle to keep up in heating mode.

Choosing the Right Heat Pump

Based on the load calculation and your home's existing setup, we recommend the best system type. Air-source, dual-fuel, or variable-speed options are discussed with clear explanations of what each one offers and how it fits your situation and budget.

Removing the Existing System

Our team removes the old outdoor unit and indoor components, disconnects refrigerant lines, and clears the installation area. Refrigerant is recovered safely following proper handling procedures, and old equipment is hauled away from the property.

Ac Heat Pump Installation & Wiring

The new outdoor unit and indoor air handler are set in place, connected with refrigerant lines, and wired to the electrical panel and thermostat. Our licensed contractors follow manufacturer specs on every connection to make sure the warranty stays intact.

Heating & Cooling Mode Verification

After installation, we run the system in both heating and cooling mode. Refrigerant pressures, airflow, thermostat communication, and temperature output are all checked. The job is not closed until both modes are confirmed working properly.

Our Recent Projects in Houston

Business Hours

Monday 7 AM–9 PM
Tuesday 7 AM–9 PM
Wednesday 7 AM–9 PM
Thursday 7 AM–9 PM
Friday 7 AM–9 PM
Saturday 8 AM–8 PM
Sunday 8 AM–5 PM
How a heat pump heats and cools your home by 75 Degree AC

How a Heat Pump Heats and Cools Your Home

A heat pump uses refrigerant and a reversing valve to move heat in two directions. In cooling mode, it works the same as a standard AC: refrigerant absorbs heat from indoor air at the evaporator coil, carries it to the outdoor unit, and releases it through the condenser coil. The fan blows outdoor air across the coil to remove the heat, and the cooled refrigerant cycles back inside.

In heating mode, the reversing valve flips the direction of refrigerant flow. The outdoor coil now absorbs heat from the outside air, even in cooler weather, and the indoor coil releases that heat into the home. Because the system moves heat rather than generating it with a flame or electric element, heat pumps use less energy than traditional furnaces for most of Houston’s mild winter season.

Proudly Serving the Entire City of Houston TX

75 Degree AC provides HVAC services across Houston TX, supporting residential and light commercial properties throughout the city. Our service coverage reflects how HVAC demand actually works in Houston, from central neighborhoods to outer city districts. Customers rely on us for consistent service standards, clear communication, and dependable system support city-wide.

Request a Quote for Heat Pump Installation

Running two separate systems for heating and cooling costs more than it should. Get started with 75 Degree AC at (713) 598-2737. We will evaluate your home, confirm the right heat pump fit, and quote the full job with no add-ons.

About Houston, TX

Houston,TX mild winters and long cooling season make heat pumps one of the most practical HVAC options for the area. The city averages fewer than 1,500 heating degree days per year, far less than northern cities where gas furnaces are the standard. That means a heat pump can cover both heating and cooling in Houston without the efficiency drop-off that happens in colder climates.

The low winter demand also means homeowners save on energy costs by avoiding a separate heating system. A heat pump handles both jobs with one compressor and one refrigerant circuit, which reduces equipment costs, simplifies maintenance, and cuts monthly utility bills compared to running an AC and furnace side by side.

75 Degree AC installs heat pump systems across every part of the Houston metro, from older homes in The Heights and Montrose to newer builds in Katy, Sugar Land, and Pearland. TACLA-licensed contractors are available seven days a week for consultations, quotes, and same-day installations.

Frequently Asked Questions FAQ's

Houston’s mild winters make heat pumps one of the best options for year-round comfort. The system heats and cools with one unit, which cuts equipment and maintenance costs. Our technicians install heat pumps that handle both seasons without the efficiency loss you see in colder regions.

A standard AC only cools. A heat pump cools and heats by reversing the refrigerant cycle. In cooling mode it works exactly like an AC. In heating mode it pulls heat from outdoor air and moves it inside. One system replaces both the AC and the furnace.

Yes. Heat pumps are designed to do both. Houston rarely drops below freezing, so the system runs efficiently in heating mode through most of the winter. Our contractors test both modes during every installation to confirm the system covers your home in all conditions.

Most standard heat pump installations are completed in one day. Upgrades from AC to heat pump or dual-fuel installs may take slightly longer depending on electrical and ductwork changes. We confirm the expected timeline before any work begins so you can plan around it.

A dual-fuel system pairs a heat pump with a gas furnace. The heat pump runs in mild weather and the furnace kicks in during the coldest nights. Our team recommends dual-fuel when the home already has a gas line and the homeowner wants backup heating for rare deep freezes.

Houston winters are mild enough that heat pumps run at high efficiency for almost the entire season. Temperatures rarely stay below 40 degrees for long. Our licensed contractors size every system based on local climate data, so the heat pump is matched to what Houston actually demands.