Flat Diagnostic
Before 2pm
Waived with approved repair
240+ Reviews
TACLA Class A
Window units are loud, block natural light, and leave gaps in security. Ductless air conditioning replaces them with a wall-mounted unit that cools quieter, runs more efficiently, and keeps your windows free. Our contractors remove the old units and install the ductless system the same day.
We design single-zone and multi-zone ductless layouts based on square footage, room count, insulation, and how the home is used. Every system is sized correctly so the compressor is not overworked and each room reaches the set temperature.
The refrigerant line set, drain line, and wiring run through a single small opening in the exterior wall. Our contractors route the lines along corners and trim, cover them with a matching line hide, and keep the exterior clean. The wall opening is sealed and weatherproofed after installation.
Some homes are better served by central AC, even when they currently have no ducts. We walk through both options and explain where ductless saves money and where central makes more sense. The recommendation is based on the home, not the sale.
Many single-zone ductless installations are completed the same day. Multi-zone systems typically take one to two days depending on the number of indoor units and the complexity of the line routing. Scheduling is confirmed when you book.
We walk through the home with you, identify every room that needs cooling, check wall space for indoor unit placement, and evaluate the best outdoor unit location.
Based on the walkthrough, we select the right system size, the correct number of indoor units, and the refrigerant line routing.
Each indoor unit is mounted on the wall at the correct height and position for airflow.
The line set, drain, and communication wire run through a single core-drilled hole in the exterior wall. Lines are routed along the outside of the home using a line hide for a clean look.
We vacuum the line set, release the factory refrigerant charge, and power on the system.
75 Degree AC provides HVAC services across Houston TX, supporting residential and light commercial properties throughout the city. Our service coverage reflects how HVAC demand actually works in Houston, from central neighborhoods to outer city districts. Customers rely on us for consistent service standards, clear communication, and dependable system support city-wide.
Years
Experience
Ductless AC and mini-split refer to the same type of system. Both use an outdoor condenser connected to one or more indoor wall units through refrigerant lines instead of ductwork. The terms are used interchangeably in the HVAC industry. Our contractors install both single-zone and multi-zone configurations.
A properly designed multi-zone ductless system can cool an entire home. We install systems with up to five indoor units connected to one outdoor condenser, and each room gets independent temperature control. Our team sizes the system based on square footage, layout, and insulation levels.
It depends on the home. Ductless systems work well for homes without existing ducts, small footprints, and room additions. Central AC may make more sense for larger homes with open floor plans. We evaluate both options during the walkthrough and recommend the one that fits the home best.
A single-zone ductless installation is typically completed in one day. Multi-zone systems with three to five indoor units usually take one to two days depending on line routing and electrical work. We confirm the timeline before starting and keeps the schedule on track.